# mac: 000e082aee4d # *** # *** SPA2102 5.2.10 Configuration Parameters # *** # *** System Configuration Restricted_Access_Domains "" ; Enable_Web_Admin_Access "Yes" ; Admin_Passwd "VosolnocNod0" ; User_Password ! "" ; # *** Internet Connection Settings Connection_Type ! "DHCP" ; # options: DHCP/Static IP/PPPOE/PPPOE,DHCP/DHCP,PPPOE # *** Static IP Settings Static_IP ! "" ; NetMask ! "" ; Gateway ! "" ; # *** PPPoE Settings PPPOE_Login_Name ! "" ; PPPOE_Login_Password ! "" ; PPPOE_Service_Name ! "" ; # *** Optional Settings HostName ! "SPA-2102" ; Domain ! "" ; Primary_DNS ! "" ; Secondary_DNS ! "" ; DNS_Server_Order "Manual" ; # options: Manual/Manual,DHCP/DHCP,Manual DNS_Query_Mode "Parallel" ; # options: Parallel/Sequential Primary_NTP_Server "0.us.pool.ntp.org" ; Secondary_NTP_Server "1.north-america.pool.ntp.org" ; DHCP_IP_Revalidate_Timer "0" ; Networking_Service ! "Auto" ; # options: NAT/Bridge/Auto Auto_NetService_Private_IP_Ranges ! "10.0.0.0-10.255.255.255,192.168.0.0-192.168.255.255,172.16.0.0-172.31.255.255" ; # *** LAN Network Settings LAN_IP_Address ! "192.168.0.1" ; LAN_Subnet_Mask ! "255.255.255.0" ; # options: 255.255.255.0/255.255.255.128/255.255.255.192/255.255.255.224/255.255.255.240/255.255.255.248/255.255.255.252 # *** Enable_DHCP_Server ! "Yes" ; DHCP_Lease_Time ! "24" ; DHCP_Client_Starting_IP_Address ! "2" ; Number_of_Client_IP_Addresses ! "50" ; # *** Static DHCP Lease Settings # *** MAC Clone Settings Enable_MAC_Clone_Service ! "No" ; Cloned_MAC_Address ! "" ; # *** Remote Management Enable_WAN_Web_Server ! "Yes" ; WAN_Web_Server_Port ! "80" ; # *** QOS Settings QOS_Policy "Always On" ; # options: Always On/On When Phone In Use QOS_QDisc ! "NONE" ; # options: NONE/TBF Maximum_Uplink_Speed ! "128" ; # *** VLAN Settings Enable_VLAN ! "No" ; VLAN_ID ! "1" ; # *** Miscellaneous Settings Syslog_Server "" ; Debug_Server "" ; Debug_Level "0" ; # options: 0/1/2/3 # *** Product Information # *** System Status # *** Configuration Profile Provision_Enable "Yes" ; Resync_On_Reset "Yes" ; Resync_Random_Delay "2" ; Resync_Periodic "1800" ; Resync_Error_Retry_Delay "1800" ; Forced_Resync_Delay "14400" ; Resync_From_SIP "Yes" ; Resync_After_Upgrade_Attempt "Yes" ; Resync_Trigger_1 "" ; Resync_Trigger_2 "" ; Resync_Fails_On_FNF "Yes" ; Profile_Rule "http://prov1.voiceopia.com/linksys/spa$MA.cfg" ; Profile_Rule_B "" ; Profile_Rule_C "" ; Profile_Rule_D "" ; Log_Resync_Request_Msg "$PN $MAC -- Requesting resync $SCHEME://$SERVIP:$PORT$PATH" ; Log_Resync_Success_Msg "$PN $MAC -- Successful resync $SCHEME://$SERVIP:$PORT$PATH" ; Log_Resync_Failure_Msg "$PN $MAC -- Resync failed: $ERR" ; Report_Rule "" ; # *** Firmware Upgrade Upgrade_Enable "Yes" ; Upgrade_Error_Retry_Delay "3600" ; Downgrade_Rev_Limit "" ; Upgrade_Rule "http://prov1.voiceopia.com/linksys/spa2102-5-2-12.bin" ; Log_Upgrade_Request_Msg "$PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH" ; Log_Upgrade_Success_Msg "$PN $MAC -- Successful upgrade $SCHEME://$SERVIP:$PORT$PATH -- $ERR" ; Log_Upgrade_Failure_Msg "$PN $MAC -- Upgrade failed: $ERR" ; License_Keys "" ; Recovery_URL "" ; # *** General Purpose Parameters GPP_A "" ; GPP_B "" ; GPP_C "" ; GPP_D "" ; GPP_E "" ; GPP_F "" ; GPP_G "" ; GPP_H "" ; GPP_I "" ; GPP_J "" ; GPP_K "" ; GPP_L "" ; GPP_M "" ; GPP_N "" ; GPP_O "" ; GPP_P "" ; GPP_SA "" ; GPP_SB "" ; GPP_SC "" ; GPP_SD "" ; # *** SIP Parameters Max_Forward "70" ; Max_Redirection "5" ; Max_Auth "2" ; SIP_User_Agent_Name "$VERSION" ; SIP_Server_Name "$VERSION" ; SIP_Reg_User_Agent_Name "" ; SIP_Accept_Language "" ; DTMF_Relay_MIME_Type "application/dtmf-relay" ; Hook_Flash_MIME_Type "application/hook-flash" ; Remove_Last_Reg "No" ; Use_Compact_Header "No" ; Escape_Display_Name "No" ; RFC_2543_Call_Hold "Yes" ; Mark_All_AVT_Packets "Yes" ; SIP_TCP_Port_Min "5060" ; SIP_TCP_Port_Max "5080" ; # *** SIP Timer Values (sec) SIP_T1 ".5" ; SIP_T2 "4" ; SIP_T4 "5" ; SIP_Timer_B "32" ; SIP_Timer_F "32" ; SIP_Timer_H "32" ; SIP_Timer_D "32" ; SIP_Timer_J "32" ; INVITE_Expires "240" ; ReINVITE_Expires "30" ; Reg_Min_Expires "1" ; Reg_Max_Expires "7200" ; Reg_Retry_Intvl "30" ; Reg_Retry_Long_Intvl "1200" ; Reg_Retry_Random_Delay "" ; Reg_Retry_Long_Random_Delay "" ; Reg_Retry_Intvl_Cap "" ; # *** Response Status Code Handling SIT1_RSC "" ; SIT2_RSC "" ; SIT3_RSC "" ; SIT4_RSC "" ; Try_Backup_RSC "" ; Retry_Reg_RSC "" ; # *** RTP Parameters RTP_Port_Min "16384" ; RTP_Port_Max "16482" ; RTP_Packet_Size "0.030" ; Max_RTP_ICMP_Err "0" ; RTCP_Tx_Interval "0" ; No_UDP_Checksum "No" ; Stats_In_BYE "No" ; # *** SDP Payload Types NSE_Dynamic_Payload "100" ; AVT_Dynamic_Payload "101" ; INFOREQ_Dynamic_Payload "" ; G726r16_Dynamic_Payload "98" ; G726r24_Dynamic_Payload "97" ; G726r32_Dynamic_Payload "2" ; G726r40_Dynamic_Payload "96" ; G729b_Dynamic_Payload "99" ; EncapRTP_Dynamic_Payload "112" ; RTP-Start-Loopback_Dynamic_Payload "113" ; RTP-Start-Loopback_Codec "G711u" ; # options: G711u/G711a/G726-16/G726-24/G726-32/G726-40/G729a/G723 NSE_Codec_Name "NSE" ; AVT_Codec_Name "telephone-event" ; G711u_Codec_Name "PCMU" ; G711a_Codec_Name "PCMA" ; G726r16_Codec_Name "G726-16" ; G726r24_Codec_Name "G726-24" ; G726r32_Codec_Name "G726-32" ; G726r40_Codec_Name "G726-40" ; G729a_Codec_Name "G729a" ; G729b_Codec_Name "G729ab" ; G723_Codec_Name "G723" ; EncapRTP_Codec_Name "encaprtp" ; # *** NAT Support Parameters Handle_VIA_received "No" ; Handle_VIA_rport "No" ; Insert_VIA_received "No" ; Insert_VIA_rport "No" ; Substitute_VIA_Addr "No" ; Send_Resp_To_Src_Port "No" ; STUN_Enable "No" ; STUN_Test_Enable "No" ; STUN_Server "" ; TURN_Server "" ; Auth_Server "" ; EXT_IP "" ; EXT_RTP_Port_Min "" ; NAT_Keep_Alive_Intvl "15" ; # *** Line_Enable[1] "Yes" ; # *** Streaming Audio Server (SAS) SAS_Enable[1] "No" ; SAS_DLG_Refresh_Intvl[1] "30" ; SAS_Inbound_RTP_Sink[1] "" ; # *** NAT Settings NAT_Mapping_Enable[1] "Yes" ; NAT_Keep_Alive_Enable[1] "Yes" ; NAT_Keep_Alive_Msg[1] "$NOTIFY" ; NAT_Keep_Alive_Dest[1] "$PROXY" ; # *** Network Settings SIP_ToS/DiffServ_Value[1] "0x68" ; SIP_CoS_Value[1] "3" ; RTP_ToS/DiffServ_Value[1] "0xb8" ; RTP_CoS_Value[1] "6" ; Network_Jitter_Level[1] "medium" ; # options: low/medium/high/very high/extremely high Jitter_Buffer_Adjustment[1] "up and down" ; # options: up and down/up only/down only/disable # *** SIP Settings SIP_Transport[1] "UDP" ; # options: UDP/TCP/TLS SIP_Port[1] "62014" ; SIP_100REL_Enable[1] "No" ; EXT_SIP_Port[1] "" ; Auth_Resync-Reboot[1] "No" ; SIP_Proxy-Require[1] "" ; SIP_Remote-Party-ID[1] "Yes" ; SIP_GUID[1] "No" ; SIP_Debug_Option[1] "none" ; # options: none/1-line/1-line excl. OPT/1-line excl. NTFY/1-line excl. REG/1-line excl. OPT|NTFY|REG/full/full excl. OPT/full excl. NTFY/full excl. REG/full excl. OPT|NTFY|REG RTP_Log_Intvl[1] "0" ; Restrict_Source_IP[1] "No" ; Referor_Bye_Delay[1] "4" ; Refer_Target_Bye_Delay[1] "0" ; Referee_Bye_Delay[1] "0" ; Refer-To_Target_Contact[1] "No" ; Sticky_183[1] "No" ; Auth_INVITE[1] "No" ; Reply_182_On_Call_Waiting[1] "No" ; Use_Anonymous_With_RPID[1] "Yes" ; Use_Local_Addr_In_FROM[1] "No" ; # *** Call Feature Settings Blind_Attn-Xfer_Enable[1] "No" ; MOH_Server[1] "" ; Xfer_When_Hangup_Conf[1] "No" ; Conference_Bridge_URL[1] "" ; Conference_Bridge_Ports[1] "3" ; # options: 3/4/5/6/7/8/9/10 # *** Proxy and Registration Proxy[1] "voip4.voiceopia.net:5060" ; Outbound_Proxy[1] "voip4.voiceopia.net:5060" ; Use_Outbound_Proxy[1] "Yes" ; Use_OB_Proxy_In_Dialog[1] "Yes" ; Register[1] "Yes" ; Make_Call_Without_Reg[1] "No" ; Register_Expires[1] "120" ; Ans_Call_Without_Reg[1] "No" ; Use_DNS_SRV[1] "No" ; DNS_SRV_Auto_Prefix[1] "No" ; Proxy_Fallback_Intvl[1] "1200" ; Proxy_Redundancy_Method[1] "Normal" ; # options: Normal/Based on SRV Port Voice_Mail_Server[1] "" ; Mailbox_Subscribe_Expires[1] "2147483647" ; # *** Subscriber Information Display_Name[1] "KD4NEC REPEATER" ; User_ID[1] "gault-jeremy-rptr" ; Password[1] "g2Zl5Nl4yu2DhPJFxZF05ioS" ; Use_Auth_ID[1] "Yes" ; Auth_ID[1] "gault-jeremy-rptr" ; Mini_Certificate[1] "" ; SRTP_Private_Key[1] "" ; # *** Supplementary Service Subscription Call_Waiting_Serv[1] "No" ; Block_CID_Serv[1] "No" ; Block_ANC_Serv[1] "No" ; Dist_Ring_Serv[1] "No" ; Cfwd_All_Serv[1] "No" ; Cfwd_Busy_Serv[1] "No" ; Cfwd_No_Ans_Serv[1] "No" ; Cfwd_Sel_Serv[1] "No" ; Cfwd_Last_Serv[1] "No" ; Block_Last_Serv[1] "No" ; Accept_Last_Serv[1] "No" ; DND_Serv[1] "No" ; CID_Serv[1] "Yes" ; CWCID_Serv[1] "No" ; Call_Return_Serv[1] "No" ; Call_Redial_Serv[1] "No" ; Call_Back_Serv[1] "No" ; Three_Way_Call_Serv[1] "No" ; Three_Way_Conf_Serv[1] "No" ; Attn_Transfer_Serv[1] "No" ; Unattn_Transfer_Serv[1] "No" ; MWI_Serv[1] "No" ; VMWI_Serv[1] "No" ; Speed_Dial_Serv[1] "Yes" ; Secure_Call_Serv[1] "No" ; Referral_Serv[1] "Yes" ; Feature_Dial_Serv[1] "Yes" ; Service_Announcement_Serv[1] "Yes" ; # *** Audio Configuration Preferred_Codec[1] "G711u" ; # options: G711u/G711a/G726-16/G726-24/G726-32/G726-40/G729a/G723 Second_Preferred_Codec[1] "Unspecified" ; # options: Unspecified/G711u/G711a/G726-16/G726-24/G726-32/G726-40/G729a/G723 Third_Preferred_Codec[1] "Unspecified" ; # options: Unspecified/G711u/G711a/G726-16/G726-24/G726-32/G726-40/G729a/G723 Use_Pref_Codec_Only[1] "No" ; Silence_Supp_Enable[1] "No" ; Silence_Threshold[1] "medium" ; # options: high/medium/low G729a_Enable[1] "Yes" ; Echo_Canc_Enable[1] "Yes" ; G723_Enable[1] "Yes" ; Echo_Canc_Adapt_Enable[1] "Yes" ; G726-16_Enable[1] "Yes" ; Echo_Supp_Enable[1] "Yes" ; G726-24_Enable[1] "Yes" ; FAX_CED_Detect_Enable[1] "No" ; G726-32_Enable[1] "Yes" ; FAX_CNG_Detect_Enable[1] "No" ; G726-40_Enable[1] "Yes" ; FAX_Passthru_Codec[1] "G711u" ; # options: G711u/G711a DTMF_Process_INFO[1] "Yes" ; FAX_Codec_Symmetric[1] "Yes" ; DTMF_Process_AVT[1] "Yes" ; FAX_Passthru_Method[1] "NSE" ; # options: None/NSE/ReINVITE DTMF_Tx_Method[1] "AVT" ; # options: InBand/AVT/INFO/Auto/InBand+INFO/AVT+INFO DTMF_Tx_Mode[1] "Strict" ; # options: Normal/Strict DTMF_Tx_Strict_Hold_Off_Time[1] "40" ; FAX_Process_NSE[1] "No" ; Hook_Flash_Tx_Method[1] "None" ; # options: None/AVT/INFO FAX_Disable_ECAN[1] "No" ; Release_Unused_Codec[1] "Yes" ; FAX_Enable_T38[1] "No" ; FAX_T38_Redundancy[1] "1" ; # options: 0/1/2/3 FAX_Tone_Detect_Mode[1] "caller or callee" ; # options: caller or callee/caller only/callee only # *** Dial Plan Dial_Plan[1] "(<:1423>[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxx|*xx|[469]11)" ; Enable_IP_Dialing[1] "No" ; Emergency_Number[1] "911" ; # *** FXS Port Polarity Configuration Idle_Polarity[1] "Forward" ; # options: Forward/Reverse Caller_Conn_Polarity[1] "Forward" ; # options: Forward/Reverse Callee_Conn_Polarity[1] "Forward" ; # options: Forward/Reverse # *** Call Forward Settings Cfwd_All_Dest[1] ! "" ; Cfwd_Busy_Dest[1] ! "" ; Cfwd_No_Ans_Dest[1] ! "" ; Cfwd_No_Ans_Delay[1] ! "20" ; # *** Selective Call Forward Settings Cfwd_Sel1_Caller[1] ! "" ; Cfwd_Sel1_Dest[1] ! "" ; Cfwd_Sel2_Caller[1] ! "" ; Cfwd_Sel2_Dest[1] ! "" ; Cfwd_Sel3_Caller[1] ! "" ; Cfwd_Sel3_Dest[1] ! "" ; Cfwd_Sel4_Caller[1] ! "" ; Cfwd_Sel4_Dest[1] ! "" ; Cfwd_Sel5_Caller[1] ! "" ; Cfwd_Sel5_Dest[1] ! "" ; Cfwd_Sel6_Caller[1] ! "" ; Cfwd_Sel6_Dest[1] ! "" ; Cfwd_Sel7_Caller[1] ! "" ; Cfwd_Sel7_Dest[1] ! "" ; Cfwd_Sel8_Caller[1] ! "" ; Cfwd_Sel8_Dest[1] ! "" ; Cfwd_Last_Caller[1] ! "" ; Cfwd_Last_Dest[1] ! "" ; Block_Last_Caller[1] ! "" ; Accept_Last_Caller[1] ! "" ; # *** Speed Dial Settings Speed_Dial_2[1] ! "" ; Speed_Dial_3[1] ! "" ; Speed_Dial_4[1] ! "" ; Speed_Dial_5[1] ! "" ; Speed_Dial_6[1] ! "" ; Speed_Dial_7[1] ! "" ; Speed_Dial_8[1] ! "" ; Speed_Dial_9[1] ! "" ; # *** Supplementary Service Settings CW_Setting[1] ! "No" ; Block_CID_Setting[1] ! "No" ; Block_ANC_Setting[1] ! "No" ; DND_Setting[1] ! "No" ; CID_Setting[1] ! "Yes" ; CWCID_Setting[1] ! "No" ; Dist_Ring_Setting[1] ! "Yes" ; Secure_Call_Setting[1] "No" ; Message_Waiting[1] ! "No" ; Accept_Media_Loopback_Request[1] "automatic" ; # options: never/automatic/manual Media_Loopback_Mode[1] "source" ; # options: source/mirror Media_Loopback_Type[1] "media" ; # options: media/packet # *** Distinctive Ring Settings Ring1_Caller[1] ! "" ; Ring2_Caller[1] ! "" ; Ring3_Caller[1] ! "" ; Ring4_Caller[1] ! "" ; Ring5_Caller[1] ! "" ; Ring6_Caller[1] ! "" ; Ring7_Caller[1] ! "" ; Ring8_Caller[1] ! "" ; Ring9_Caller[1] "" ; # *** Ring Settings Default_Ring[1] ! "1" ; # options: 1/2/3/4/5/6/7/8/9 Default_CWT[1] ! "1" ; # options: 1/2/3/4/5/6/7/8/9 Hold_Reminder_Ring[1] ! "8" ; # options: 1/2/3/4/5/6/7/8/9/none Call_Back_Ring[1] ! "7" ; # options: 1/2/3/4/5/6/7/8/9 Cfwd_Ring_Splash_Len[1] ! "0" ; Cblk_Ring_Splash_Len[1] ! "0" ; VMWI_Ring_Splash_Len[1] ! "0" ; VMWI_Ring_Policy[1] "New VM Available" ; # options: New VM Available/New VM Becomes Available/New VM Arrives Ring_On_No_New_VM[1] "No" ; # *** Line_Enable[2] "Yes" ; # *** Streaming Audio Server (SAS) SAS_Enable[2] "No" ; SAS_DLG_Refresh_Intvl[2] "30" ; SAS_Inbound_RTP_Sink[2] "" ; # *** NAT Settings NAT_Mapping_Enable[2] "Yes" ; NAT_Keep_Alive_Enable[2] "Yes" ; NAT_Keep_Alive_Msg[2] "$NOTIFY" ; NAT_Keep_Alive_Dest[2] "$PROXY" ; # *** Network Settings SIP_ToS/DiffServ_Value[2] "0x68" ; SIP_CoS_Value[2] "3" ; RTP_ToS/DiffServ_Value[2] "0xb8" ; RTP_CoS_Value[2] "6" ; Network_Jitter_Level[2] "medium" ; # options: low/medium/high/very high/extremely high Jitter_Buffer_Adjustment[2] "up and down" ; # options: up and down/up only/down only/disable # *** SIP Settings SIP_Transport[2] "UDP" ; # options: UDP/TCP/TLS SIP_Port[2] "47921" ; SIP_100REL_Enable[2] "No" ; EXT_SIP_Port[2] "" ; Auth_Resync-Reboot[2] "Yes" ; SIP_Proxy-Require[2] "" ; SIP_Remote-Party-ID[2] "Yes" ; SIP_GUID[2] "No" ; SIP_Debug_Option[2] "none" ; # options: none/1-line/1-line excl. OPT/1-line excl. NTFY/1-line excl. REG/1-line excl. OPT|NTFY|REG/full/full excl. OPT/full excl. NTFY/full excl. REG/full excl. OPT|NTFY|REG RTP_Log_Intvl[2] "0" ; Restrict_Source_IP[2] "No" ; Referor_Bye_Delay[2] "4" ; Refer_Target_Bye_Delay[2] "0" ; Referee_Bye_Delay[2] "0" ; Refer-To_Target_Contact[2] "No" ; Sticky_183[2] "No" ; Auth_INVITE[2] "No" ; Reply_182_On_Call_Waiting[2] "No" ; Use_Anonymous_With_RPID[2] "Yes" ; Use_Local_Addr_In_FROM[2] "No" ; # *** Call Feature Settings Blind_Attn-Xfer_Enable[2] "Yes" ; MOH_Server[2] "" ; Xfer_When_Hangup_Conf[2] "Yes" ; Conference_Bridge_URL[2] "" ; Conference_Bridge_Ports[2] "3" ; # options: 3/4/5/6/7/8/9/10 # *** Proxy and Registration Proxy[2] "voip5.voiceopia.net:5060" ; Outbound_Proxy[2] "voip5.voiceopia.net:5060" ; Use_Outbound_Proxy[2] "Yes" ; Use_OB_Proxy_In_Dialog[2] "Yes" ; Register[2] "Yes" ; Make_Call_Without_Reg[2] "No" ; Register_Expires[2] "60" ; Ans_Call_Without_Reg[2] "No" ; Use_DNS_SRV[2] "No" ; DNS_SRV_Auto_Prefix[2] "No" ; Proxy_Fallback_Intvl[2] "3600" ; Proxy_Redundancy_Method[2] "Normal" ; # options: Normal/Based on SRV Port Voice_Mail_Server[2] "" ; Mailbox_Subscribe_Expires[2] "2147483647" ; # *** Subscriber Information Display_Name[2] "C A R C" ; User_ID[2] "carc" ; Password[2] "S11Phn9Td1xFc2reXJSDitwoEIttCApB" ; Use_Auth_ID[2] "Yes" ; Auth_ID[2] "carc" ; Mini_Certificate[2] "" ; SRTP_Private_Key[2] "" ; # *** Supplementary Service Subscription Call_Waiting_Serv[2] "Yes" ; Block_CID_Serv[2] "No" ; Block_ANC_Serv[2] "No" ; Dist_Ring_Serv[2] "No" ; Cfwd_All_Serv[2] "No" ; Cfwd_Busy_Serv[2] "No" ; Cfwd_No_Ans_Serv[2] "No" ; Cfwd_Sel_Serv[2] "No" ; Cfwd_Last_Serv[2] "No" ; Block_Last_Serv[2] "No" ; Accept_Last_Serv[2] "No" ; DND_Serv[2] "No" ; CID_Serv[2] "Yes" ; CWCID_Serv[2] "Yes" ; Call_Return_Serv[2] "No" ; Call_Redial_Serv[2] "No" ; Call_Back_Serv[2] "No" ; Three_Way_Call_Serv[2] "Yes" ; Three_Way_Conf_Serv[2] "Yes" ; Attn_Transfer_Serv[2] "Yes" ; Unattn_Transfer_Serv[2] "Yes" ; MWI_Serv[2] "Yes" ; VMWI_Serv[2] "Yes" ; Speed_Dial_Serv[2] "No" ; Secure_Call_Serv[2] "No" ; Referral_Serv[2] "No" ; Feature_Dial_Serv[2] "No" ; Service_Announcement_Serv[2] "No" ; # *** Audio Configuration Preferred_Codec[2] "G711u" ; # options: G711u/G711a/G726-16/G726-24/G726-32/G726-40/G729a/G723 Second_Preferred_Codec[2] "Unspecified" ; # options: Unspecified/G711u/G711a/G726-16/G726-24/G726-32/G726-40/G729a/G723 Third_Preferred_Codec[2] "Unspecified" ; # options: Unspecified/G711u/G711a/G726-16/G726-24/G726-32/G726-40/G729a/G723 Use_Pref_Codec_Only[2] "No" ; Silence_Supp_Enable[2] "No" ; Silence_Threshold[2] "medium" ; # options: high/medium/low G729a_Enable[2] "Yes" ; Echo_Canc_Enable[2] "Yes" ; G723_Enable[2] "Yes" ; Echo_Canc_Adapt_Enable[2] "Yes" ; G726-16_Enable[2] "Yes" ; Echo_Supp_Enable[2] "Yes" ; G726-24_Enable[2] "Yes" ; FAX_CED_Detect_Enable[2] "Yes" ; G726-32_Enable[2] "Yes" ; FAX_CNG_Detect_Enable[2] "Yes" ; G726-40_Enable[2] "Yes" ; FAX_Passthru_Codec[2] "G711u" ; # options: G711u/G711a DTMF_Process_INFO[2] "Yes" ; FAX_Codec_Symmetric[2] "Yes" ; DTMF_Process_AVT[2] "Yes" ; FAX_Passthru_Method[2] "NSE" ; # options: None/NSE/ReINVITE DTMF_Tx_Method[2] "Auto" ; # options: InBand/AVT/INFO/Auto/InBand+INFO/AVT+INFO DTMF_Tx_Mode[2] "Strict" ; # options: Normal/Strict DTMF_Tx_Strict_Hold_Off_Time[2] "40" ; FAX_Process_NSE[2] "Yes" ; Hook_Flash_Tx_Method[2] "None" ; # options: None/AVT/INFO FAX_Disable_ECAN[2] "No" ; Release_Unused_Codec[2] "Yes" ; FAX_Enable_T38[2] "No" ; FAX_T38_Redundancy[2] "1" ; # options: 0/1/2/3 FAX_Tone_Detect_Mode[2] "caller or callee" ; # options: caller or callee/caller only/callee only # *** Dial Plan Dial_Plan[2] "(<:1423>[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxx|*xx|[469]11S0)" ; Enable_IP_Dialing[2] "No" ; Emergency_Number[2] "" ; # *** FXS Port Polarity Configuration Idle_Polarity[2] "Forward" ; # options: Forward/Reverse Caller_Conn_Polarity[2] "Forward" ; # options: Forward/Reverse Callee_Conn_Polarity[2] "Forward" ; # options: Forward/Reverse # *** Call Forward Settings Cfwd_All_Dest[2] ! "" ; Cfwd_Busy_Dest[2] ! "" ; Cfwd_No_Ans_Dest[2] ! "" ; Cfwd_No_Ans_Delay[2] ! "20" ; # *** Selective Call Forward Settings Cfwd_Sel1_Caller[2] ! "" ; Cfwd_Sel1_Dest[2] ! "" ; Cfwd_Sel2_Caller[2] ! "" ; Cfwd_Sel2_Dest[2] ! "" ; Cfwd_Sel3_Caller[2] ! "" ; Cfwd_Sel3_Dest[2] ! "" ; Cfwd_Sel4_Caller[2] ! "" ; Cfwd_Sel4_Dest[2] ! "" ; Cfwd_Sel5_Caller[2] ! "" ; Cfwd_Sel5_Dest[2] ! "" ; Cfwd_Sel6_Caller[2] ! "" ; Cfwd_Sel6_Dest[2] ! "" ; Cfwd_Sel7_Caller[2] ! "" ; Cfwd_Sel7_Dest[2] ! "" ; Cfwd_Sel8_Caller[2] ! "" ; Cfwd_Sel8_Dest[2] ! "" ; Cfwd_Last_Caller[2] ! "" ; Cfwd_Last_Dest[2] ! "" ; Block_Last_Caller[2] ! "" ; Accept_Last_Caller[2] ! "" ; # *** Speed Dial Settings Speed_Dial_2[2] ! "" ; Speed_Dial_3[2] ! "" ; Speed_Dial_4[2] ! "" ; Speed_Dial_5[2] ! "" ; Speed_Dial_6[2] ! "" ; Speed_Dial_7[2] ! "" ; Speed_Dial_8[2] ! "" ; Speed_Dial_9[2] ! "" ; # *** Supplementary Service Settings CW_Setting[2] ! "Yes" ; Block_CID_Setting[2] ! "No" ; Block_ANC_Setting[2] ! "No" ; DND_Setting[2] ! "No" ; CID_Setting[2] ! "Yes" ; CWCID_Setting[2] ! "Yes" ; Dist_Ring_Setting[2] ! "Yes" ; Secure_Call_Setting[2] "No" ; Message_Waiting[2] ; Accept_Media_Loopback_Request[2] "automatic" ; # options: never/automatic/manual Media_Loopback_Mode[2] "source" ; # options: source/mirror Media_Loopback_Type[2] "media" ; # options: media/packet # *** Distinctive Ring Settings Ring1_Caller[2] ! "" ; Ring2_Caller[2] ! "" ; Ring3_Caller[2] ! "" ; Ring4_Caller[2] ! "" ; Ring5_Caller[2] ! "" ; Ring6_Caller[2] ! "" ; Ring7_Caller[2] ! "" ; Ring8_Caller[2] ! "" ; Ring9_Caller[2] "" ; # *** Ring Settings Default_Ring[2] ! "1" ; # options: 1/2/3/4/5/6/7/8/9 Default_CWT[2] ! "1" ; # options: 1/2/3/4/5/6/7/8/9 Hold_Reminder_Ring[2] ! "8" ; # options: 1/2/3/4/5/6/7/8/9/none Call_Back_Ring[2] ! "7" ; # options: 1/2/3/4/5/6/7/8/9 Cfwd_Ring_Splash_Len[2] ! "0" ; Cblk_Ring_Splash_Len[2] ! "0" ; VMWI_Ring_Splash_Len[2] ! "0" ; VMWI_Ring_Policy[2] "New VM Available" ; # options: New VM Available/New VM Becomes Available/New VM Arrives Ring_On_No_New_VM[2] "No" ; # *** Call Progress Tones Dial_Tone "350@-19,440@-19;10(*/0/1+2)" ; #Second_Dial_Tone "420@-19,520@-19;10(*/0/1+2)" ; Second_Dial_Tone "350@-19,440@-19;0.6(.1/.1/1+2);10(*/0/1+2)" ; Outside_Dial_Tone "420@-16;10(*/0/1)" ; #Prompt_Tone "520@-19,620@-19;10(*/0/1+2)" ; Prompt_Tone "350@-19,440@-19;0.6(.1/.1/1+2);10(*/0/1+2)" ; Busy_Tone "480@-19,620@-19;10(.5/.5/1+2)" ; Reorder_Tone "480@-19,620@-19;10(.25/.25/1+2)" ; Off_Hook_Warning_Tone "480@-10,620@0;10(.125/.125/1+2)" ; Ring_Back_Tone "440@-19,480@-19;*(2/4/1+2)" ; Ring_Back_2_Tone "440@-19,480@-19;*(1/1/1+2)" ; Confirm_Tone "600@-16;1(.25/.25/1)" ; SIT1_Tone "985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)" ; SIT2_Tone "914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)" ; SIT3_Tone "914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)" ; SIT4_Tone "985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)" ; MWI_Dial_Tone "350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)" ; Cfwd_Dial_Tone "350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)" ; Holding_Tone "600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)" ; Conference_Tone "350@-19;20(.1/.1/1,.1/9.7/1)" ; Secure_Call_Indication_Tone "397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)" ; Feature_Invocation_Tone "350@-16;*(.1/.1/1)" ; # *** Distinctive Ring Patterns Ring1_Cadence "60(2/4)" ; Ring2_Cadence "60(.8/.4,.8/4)" ; Ring3_Cadence "60(.4/.2,.4/.2,.8/4)" ; Ring4_Cadence "60(.3/.2,1/.2,.3/4)" ; Ring5_Cadence "1(.5/.5)" ; Ring6_Cadence "60(.2/.4,.2/.4,.2/4)" ; Ring7_Cadence "60(.4/.2,.4/.2,.4/4)" ; Ring8_Cadence "60(0.25/9.75)" ; Ring9_Cadence "60(.4/.2,.4/2)" ; # *** Distinctive Call Waiting Tone Patterns CWT1_Cadence "30(.3/9.7)" ; CWT2_Cadence "30(.1/.1, .1/9.7)" ; CWT3_Cadence "30(.1/.1, .1/.1, .1/9.7)" ; CWT4_Cadence "30(.1/.1,.3/.1,.1/9.3)" ; CWT5_Cadence "1(.5/.5)" ; CWT6_Cadence "30(.1/.1,.3/.2,.3/9.1)" ; CWT7_Cadence "30(.3/.1,.3/.1,.1/9.1)" ; CWT8_Cadence "2.3(.3/2)" ; CWT9_Cadence "30(.3/9.7)" ; # *** Distinctive Ring/CWT Pattern Names Ring1_Name "Bellcore-r1" ; Ring2_Name "Bellcore-r2" ; Ring3_Name "Bellcore-r3" ; Ring4_Name "Bellcore-r4" ; Ring5_Name "Bellcore-r5" ; Ring6_Name "Bellcore-r6" ; Ring7_Name "Bellcore-r7" ; Ring8_Name "Bellcore-r8" ; Ring9_Name "Bellcore-r9" ; # *** Ring and Call Waiting Tone Spec Ring_Waveform "Sinusoid" ; # options: Sinusoid/Trapezoid Ring_Frequency "25" ; Ring_Voltage "90" ; CWT_Frequency "440@-10" ; # *** Control Timer Values (sec) Hook_Flash_Timer_Min ".1" ; Hook_Flash_Timer_Max ".9" ; Callee_On_Hook_Delay "0" ; Reorder_Delay "5" ; Call_Back_Expires "1800" ; Call_Back_Retry_Intvl "30" ; Call_Back_Delay ".5" ; VMWI_Refresh_Intvl "0" ; Interdigit_Long_Timer "10" ; Interdigit_Short_Timer "3" ; CPC_Delay "2" ; CPC_Duration "1" ; # *** Vertical Service Activation Codes Call_Return_Code "*69" ; Call_Redial_Code "*07" ; Blind_Transfer_Code "*98" ; Call_Back_Act_Code "*66" ; Call_Back_Deact_Code "*86" ; Call_Back_Busy_Act_Code "*05" ; Cfwd_All_Act_Code "*72" ; Cfwd_All_Deact_Code "*73" ; Cfwd_Busy_Act_Code "*90" ; Cfwd_Busy_Deact_Code "*91" ; Cfwd_No_Ans_Act_Code "*92" ; Cfwd_No_Ans_Deact_Code "*93" ; Cfwd_Last_Act_Code "*63" ; Cfwd_Last_Deact_Code "*83" ; Block_Last_Act_Code "*60" ; Block_Last_Deact_Code "*80" ; Accept_Last_Act_Code "*64" ; Accept_Last_Deact_Code "*84" ; CW_Act_Code "*56" ; CW_Deact_Code "*57" ; CW_Per_Call_Act_Code "*71" ; CW_Per_Call_Deact_Code "*70" ; Block_CID_Act_Code "*67" ; Block_CID_Deact_Code "*68" ; Block_CID_Per_Call_Act_Code "*81" ; Block_CID_Per_Call_Deact_Code "*82" ; Block_ANC_Act_Code "*77" ; Block_ANC_Deact_Code "*87" ; DND_Act_Code "*78" ; DND_Deact_Code "*79" ; CID_Act_Code "*65" ; CID_Deact_Code "*85" ; CWCID_Act_Code "*25" ; CWCID_Deact_Code "*45" ; Dist_Ring_Act_Code "*26" ; Dist_Ring_Deact_Code "*46" ; Speed_Dial_Act_Code "*74" ; Secure_All_Call_Act_Code "*16" ; Secure_No_Call_Act_Code "*17" ; Secure_One_Call_Act_Code "*18" ; Secure_One_Call_Deact_Code "*19" ; Conference_Act_Code "" ; Attn-Xfer_Act_Code "" ; Modem_Line_Toggle_Code "*99" ; FAX_Line_Toggle_Code "#99" ; Media_Loopback_Code "*03" ; Referral_Services_Codes "" ; Feature_Dial_Services_Codes "" ; # *** Vertical Service Announcement Codes Service_Annc_Base_Number "" ; Service_Annc_Extension_Codes "" ; # *** Outbound Call Codec Selection Codes Prefer_G711u_Code "*017110" ; Force_G711u_Code "*027110" ; Prefer_G711a_Code "*017111" ; Force_G711a_Code "*027111" ; Prefer_G723_Code "*01723" ; Force_G723_Code "*02723" ; Prefer_G726r16_Code "*0172616" ; Force_G726r16_Code "*0272616" ; Prefer_G726r24_Code "*0172624" ; Force_G726r24_Code "*0272624" ; Prefer_G726r32_Code "*0172632" ; Force_G726r32_Code "*0272632" ; Prefer_G726r40_Code "*0172640" ; Force_G726r40_Code "*0272640" ; Prefer_G729a_Code "*01729" ; Force_G729a_Code "*02729" ; # *** Miscellaneous Set_Local_Date_(mm/dd) "" ; Set_Local_Time_(HH/mm) "" ; Time_Zone "GMT-05:00" ; # options: GMT-12:00/GMT-11:00/GMT-10:00/GMT-09:00/GMT-08:00/GMT-07:00/GMT-06:00/GMT-05:00/GMT-04:00/GMT-03:30/GMT-03:00/GMT-02:00/GMT-01:00/GMT/GMT+01:00/GMT+02:00/GMT+03:00/GMT+03:30/GMT+04:00/GMT+05:00/GMT+05:30/GMT+05:45/GMT+06:00/GMT+06:30/GMT+07:00/GMT+08:00/GMT+09:00/GMT+09:30/GMT+10:00/GMT+11:00/GMT+12:00/GMT+13:00 FXS_Port_Impedance "600" ; # options: 600/900/600+2.16uF/900+2.16uF/270+750||150nF/220+820||120nF/220+820||115nF/200+600||100nF Daylight_Saving_Time_Rule "start=4/1/7;end=10/-1/7;save=1" ; Daylight_Saving_Time_Enable "Yes" ; #FXS_Port_Input_Gain "-5" ; #FXS_Port_Output_Gain "-15" ; FXS_Port_Input_Gain "-3" ; FXS_Port_Output_Gain "-3" ; DTMF_Playback_Level "-16" ; DTMF_Playback_Length ".1" ; Detect_ABCD "Yes" ; Playback_ABCD "Yes" ; Caller_ID_Method "Bellcore(N.Amer,China)" ; # options: Bellcore(N.Amer,China)/DTMF(Finland,Sweden)/DTMF(Denmark)/ETSI DTMF/ETSI DTMF With PR/ETSI DTMF After Ring/ETSI FSK/ETSI FSK With PR(UK)/DTMF(Denmark) With PR Caller_ID_FSK_Standard "bell 202" ; # options: bell 202/v.23 Feature_Invocation_Method "Default" ; # options: Default/Sweden More_Echo_Suppression "No" ; # *** Port Forwarding Settings # *** DMZ Settings Enable_DMZ ! "No" ; DMZ_Host_IP_Address ! "0" ; # *** Miscellaneous Settings Multicast_Passthru ! "Disabled" ; # options: Disabled/Inbound Only/Outbound Only/Inbound and Outbound # *** System Reserved Ports Range Starting_Port ! "50000" ; Num_of_Ports_Reserved ! "256" ; # options: 256/512/1024 # *** Protect_IVR_FactoryReset "Yes" ;